Record Info Window

The Record Info window gives information about header records in the data. This information is obtained from records received from the dispatcher or read from a ZDAB file.

This window can display information about the following types of records:

Run Record (RHDR)
Trigger Record (TRIG)
ECA Record (EPED)
Calibration Source (CAST)
AV Position (CAAC)
Laser Status (SOSL)

The displayed record type is selected from the menu at the top of the Record Info window. Note that because of the way XSNOED reads ahead of the currently displayed event, the information in this window may lead the displayed events. This is a particular problem if you want to analyze the sequence of EPED records. Perhaps a future version of XSNOED will cache these records and display them in the proper sequence with respect to the events.

Here is a description of the displayed fields for the Run Record type:

Run Number is the number of the current run.

Start Time is the SHaRC start time for the run.

Run Type gives a list of the conditions for the run (see table below for a complete list of definitions).

Sources gives a list of sources deployed for the run.

Crate Mask lists the crates which were masked into the global trigger for the run.

Run Type Definitions

Neutrino standard neutrino run

Source a source is deployed

Calib calibration run

NCD neutral current detector run

Salt salt fill run

Poison poison run

Partial partial fill run

Air air (no fill) run

D2O D2O fill run

H2O H2O fill run

UC unusual circumstances during this run

Trans transitional run -- detector configuration changing

Src Moving source moving run

Coils magnetic compensation coils are on

ECA electronics calibration run

Diag diagnostic run

Supernova supernova run (trigger levels higher than standard neutrino run)

Maint PMT hardware maintenance run

PCA phototube calibration run

Expt experimental run conditions

D2O Circ the heavy water is circulating

Bubbler the bubbler system is active

SL Assay an SL assay is being performed

NCD Maint NCD hardware maintenance run

PMT Off the PMT system is not taking data

NCD Off the NCD system is not taking data

NCD ECA NCD electronics calibration run

<##> unknown run type bit number ## is set

Neutrino	standard neutrino run
Source	a source is deployed
Calib	calibration run
NCD	neutral current detector run
Salt	salt fill run
Poison	poison run
Partial	partial fill run
Air	air (no fill) run
D2O	D2O fill run
H2O	H2O fill run
UC	unusual circumstances during this run
Trans	transitional run -- detector configuration changing
Src Moving	source moving run
Coils	magnetic compensation coils are on
ECA	electronics calibration run
Diag	diagnostic run
Supernova	supernova run (trigger levels higher than standard neutrino run)
Maint	PMT hardware maintenance run
PCA	phototube calibration run
Expt	experimental run conditions
D2O Circ	the heavy water is circulating
Bubbler	the bubbler system is active
SL Assay	an SL assay is being performed
NCD Maint	NCD hardware maintenance run
PMT Off	the PMT system is not taking data
NCD Off	the NCD system is not taking data
NCD ECA	NCD electronics calibration run
<##>	unknown run type bit number ## is set